This SmallRig 1138 camera clamp review looks at a compact rigging tool for creators who need to secure small cameras and accessories to a nearby rod, tube, table, or frame.
Its double ball head and included action-camera adapter add positioning options, while the stated 1.5 kg load limit makes payload choice an important part of the setup.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A flexible mounting option for creators who want to attach a compact camera, light, microphone, or monitor to a rod, tube, table, or frame.
- Double ball head with a 1/4-inch-20 screw for mounting compatible cameras and accessories.
- Clamp mounting for rods, tubes, tables, frames, and tripods; no drilling is required.
- Compatible gear categories include cameras, webcams, monitors, lights, microphones, and action cameras.
- Non-slip threads and an anti-twist structure are part of the clamp's upgraded design.
Pros
- Combines a gripping clamp, adjustable double ball head, and standard 1/4-inch-20 connection in one mounting tool.
- Can attach to several kinds of surfaces and supports accessory positioning without drilling.
Consider before buying
- The 1.5 kg maximum load limits its suitability for heavier cameras or accessory combinations.
- A clamp mount depends on finding a compatible surface within reach of the setup.
Read the full review summary
The 1138 combines a super clamp with a dual ball head and a 1/4-inch-20 screw, so one mount can attach supported gear and grip a separate surface without drilling.
Its aluminum and stainless steel construction, non-slip threads, and anti-twist design are intended to help keep a compact setup positioned after tightening. An action-camera adapter is included for compatible action cameras.
It is a practical fit for desk recording, vehicle or bike setups, and other situations where a compact accessory needs to be positioned off the camera body.
The design is broad in its stated compatibility, but the useful load is capped at 1.5 kg and the clamp still needs a suitable surface to grip.
For moving setups, SmallRig specifically advises attaching a safety rope to reduce the risk of a dropped device.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp can attach to rods, tubes, tables, frames, and tripods, while its 1/4-inch-20 screw supports a range of accessory types.
Angle adjustment
The double ball head gives the user more freedom to orient attached gear than a fixed mount.
Accessory versatility
The included action-camera adapter broadens the setup options alongside the standard screw connection.
Payload suitability
The stated maximum load is 1.5 kg, so the mount is better suited to compact accessories than heavier rig components.
Construction
Aluminum and stainless steel construction, plus non-slip threads and an anti-twist structure, are useful design choices for a reusable clamp.
Setup practicality
It attaches by tightening a clamp, avoiding the need to drill into the mounting surface.
Key Features and Specifications of SmallRig 1138 Clamp
- Double ball head with a 1/4-inch-20 screw for mounting compatible cameras and accessories.
- Clamp mounting for rods, tubes, tables, frames, and tripods; no drilling is required.
- Compatible gear categories include cameras, webcams, monitors, lights, microphones, and action cameras.
- Non-slip threads and an anti-twist structure are part of the clamp's upgraded design.
- Maximum stated load capacity is 1.5 kg; the unit weighs 0.2 kg.
- Aluminum and stainless steel construction, with a black finish.
- Package includes the super camera clamp and an action-camera mount adapter.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a gripping clamp, adjustable double ball head, and standard 1/4-inch-20 connection in one mounting tool.
- Can attach to several kinds of surfaces and supports accessory positioning without drilling.
- The included action-camera adapter adds a mounting option beyond the screw connection.
- Non-slip threads and anti-twist design address common positioning concerns in compact rigs.
Consider before buying
- The 1.5 kg maximum load limits its suitability for heavier cameras or accessory combinations.
- A clamp mount depends on finding a compatible surface within reach of the setup.
- For dynamic use, the manufacturer advises adding a safety rope, which means extra securing work and gear.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the 1138 if you need to position a small camera, light, microphone, webcam, or monitor away from a desk, rod, tube, frame, or tripod.
The clamp-style attachment can be useful when a conventional tripod position is inconvenient or when drilling into a surface is not an option. Its double ball head also helps aim the accessory after the clamp is in place.
It is especially worth considering if you already use compatible 1/4-inch-20 gear or an action camera that works with the included adapter.
Before choosing it, total the weight of the device and anything mounted with it, keep the combined load below 1.5 kg, and check that the target surface can be gripped securely.
If the setup will move, plan to attach a safety rope as advised.
Who should skip it
Skip this mount if your setup exceeds its 1.5 kg maximum load or requires a mount designed for a specific camera cage or monitor interface.
Also look elsewhere if the mounting point does not offer a suitable rod, tube, table, frame, or tripod surface to clamp onto.
What the SmallRig 1138 Clamp Means for Your Rig
A clamp-first mounting approach
The 1138 grips a support surface rather than requiring a dedicated threaded socket or drilled hole at the mounting point.
That makes it adaptable across a desk edge, rod, tube, frame, or tripod, provided the clamp can reach and hold the surface.
Think through where the clamp will sit and whether that position leaves the accessory clear of controls, cables, and the recording area.
Positioning with the double ball head
The dual ball head gives the attached accessory a range of orientation options, which can help when a straight-on mounting angle is awkward.
This is useful for aiming a small camera, monitor, or light from a fixed clamp point. As with any adjustable mount, tighten the assembly deliberately and check that the final angle stays suitable for the weight being carried.
Match the payload to the use
A 1.5 kg maximum capacity is the key boundary for choosing this clamp.
Count the complete mounted setup, including the accessory and any attached hardware, and leave room for a secure fit rather than treating the maximum as a target.
Small, lightweight recording accessories are the natural match for this stated capacity.
Plan for motion and attachment compatibility
The package includes an action-camera adapter, while the clamp also uses a 1/4-inch-20 screw for other compatible equipment. Confirm your device's mounting interface before assembling the rig.
For a moving scenario, such as a vehicle or bike setup, attach the recommended safety rope and inspect the clamp's hold before use.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 1138 for its included action-camera adapter and compact clamp-plus-ball-head layout. Consider the 2732 if you want a longer 9.8-inch arm and the added 3/8-inch threaded connection for positioning compatible accessories farther from the clamp.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm.
- It has 1/4-inch and 3/8-inch threads, double 360-degree ball heads, rubber cushions, and a clamp opening from 15 mm to 54 mm.
- The 1138 combines a clamp, double ball head, 1/4-inch-20 screw, and action-camera adapter, with a stated 1.5 kg maximum load.
Camera Mounts & Clamps alternative

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp 735
The 1138 is the more complete choice when you want an adjustable head and an action-camera mounting option included.
The 735 may suit a simpler rig if you only need a clamp with threaded holes and already have the ball head or arm needed for your accessory.
- The Super Clamp 735 is a clamp-only option with 1/4-inch and 3/8-inch threaded holes.
- Its jaw fits surfaces between 15 mm and about 40 mm, and rubber pads help protect the clamped surface and reduce slipping.
- The 1138 adds an adjustable double ball head and action-camera adapter to the clamp, and has a stated 1.5 kg maximum load.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 Super Camera Clamp is worth considering for compact rigs that need a flexible clamp point and adjustable accessory positioning.
Its double ball head, 1/4-inch-20 screw, and included action-camera adapter make it useful for several small-camera and production accessories.
Keep the 1.5 kg maximum load and the need for a suitable clamping surface in mind. For moving setups, include the recommended safety rope.
If those constraints fit your gear and mounting location, the 1138 offers a versatile way to add an accessory position without drilling.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A flexible mounting option for creators who want to attach a compact camera, light, microphone, or monitor to a rod, tube, table, or frame.
- Double ball head with a 1/4-inch-20 screw for mounting compatible cameras and accessories.
- Clamp mounting for rods, tubes, tables, frames, and tripods; no drilling is required.
- Compatible gear categories include cameras, webcams, monitors, lights, microphones, and action cameras.
- Non-slip threads and an anti-twist structure are part of the clamp's upgraded design.