The Silkland DP80 DisplayPort Cable review is most relevant to buyers building a close-range connection between a DP-equipped graphics card and monitor.
Its 1.6-foot length and 80Gbps DP 2.1 design suit compact desk layouts, while its advanced resolution modes depend on compatible hardware.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers and desktop users with DP 2.1 equipment who want a short connection and support for high refresh rates.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and male-to-male connectors.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes include up to 16K at 60Hz and 4K at 540Hz.
- Includes VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3 support.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 channel formats.
Pros
- High bandwidth and a wide range of listed resolution and refresh combinations for capable DP 2.1 equipment.
- Short length can help keep a close desktop connection tidy.
Consider before buying
- At 1.6 feet, it may not reach comfortably in larger desk layouts; measure the cable path, including connector clearance.
- The highest listed modes rely on compatible source and display hardware, and some require DSC.
Read the full review summary
This short male-to-male cable is designed for DisplayPort 2.1 systems, with VESA certification and support for up to 80Gbps.
The listed modes include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, it supports up to 16K at 60Hz and higher refresh options at lower resolutions.
Those figures describe available combinations, not a promise that every computer and display can use them.
Its strongest fit is a gaming PC positioned close to a monitor, especially when both ends support DisplayPort 2.1 UHBR20 and the desired resolution and refresh rate.
The 1.6-foot reach is the central practical constraint: measure the route between ports before choosing it. For a more distant display, a longer cable may make setup easier, even if it offers a different bandwidth tier.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth potential
An 80Gbps DP 2.1 design gives compatible setups headroom for high-resolution, high-refresh modes.
Display mode flexibility
The described modes cover a broad range, including uncompressed options and higher modes with DSC.
Gaming feature fit
VRR, FEC, ALLM, DSC 1.2a, MST, G-Sync, and FreeSync support target gaming and multi-display setups.
Build details
Tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior are useful construction features.
Setup flexibility
The 1.6-foot length is convenient for nearby devices but limits placement options.
Compatibility clarity
The cable is backward compatible with DP 2.0 and 1.4, though maximum modes require matching capabilities at both ends.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and male-to-male connectors.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes include up to 16K at 60Hz and 4K at 540Hz.
- Includes VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3 support.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 channel formats.
- Uses 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
- The 1.6-foot cable has a latch-free plug design and is intended for indoor use.
- Silkland provides a 24-month service period and technical support, with response described as within 18 hours.
Pros and Cons of Silkland DP80 Cable
Pros
- High bandwidth and a wide range of listed resolution and refresh combinations for capable DP 2.1 equipment.
- Short length can help keep a close desktop connection tidy.
- Gaming-oriented features include VRR, ALLM, DSC, and support for G-Sync and FreeSync.
- Shielding, tinned copper, gold-plated connectors, and a nylon exterior provide useful construction details.
Consider before buying
- At 1.6 feet, it may not reach comfortably in larger desk layouts; measure the cable path, including connector clearance.
- The highest listed modes rely on compatible source and display hardware, and some require DSC.
- The latch-free plug may be less secure in a setup where cable movement is frequent; check that the ports provide a firm fit.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if your graphics card and monitor sit close together and both have DisplayPort ports.
Its short reach can suit a compact desk arrangement, while the DP 2.1 bandwidth and listed high-refresh modes give compatible hardware room for demanding display settings.
Before buying, confirm the actual cable route and check the capabilities of both devices.
For a target such as 4K at 240Hz or 2K at 540Hz, verify that the source, monitor, and chosen display mode all support the required combination; DSC-enabled modes also require a compatible signal path.
Who should skip it
Look elsewhere if your PC and display need more than 1.6 feet of cable after accounting for routing and clearance. A longer run is a better practical fit when the devices are separated.
Choose another connection option if either device lacks DisplayPort, or if you need to use HDMI between components. This cable has DisplayPort connectors at both ends.
What the Silkland DP80 Cable Means for a Gaming Setup
Bandwidth and display modes
The 80Gbps rating and DP 2.1 specification make this cable relevant to very high refresh rates and resolutions.
The practical mode still depends on the graphics card, monitor, and any compression setting: the described 4K 240Hz, 8K 60Hz, and 2K 540Hz modes are uncompressed, while the higher 16K 60Hz option uses DSC.
Match the cable's capabilities to a mode your devices actually offer.
A short run has a specific job
At 1.6 feet, the cable is best suited to equipment placed close together, such as a desktop tower beside or beneath a monitor.
Short reach can make routing simpler when the ports are near, but it leaves little slack for moving a monitor or changing desk placement. Measure from port to port along the intended route rather than estimating straight-line distance.
Gaming and multi-display support
VRR, ALLM, FEC, and DSC 1.2a are relevant to gaming setups, while MST can support multi-monitor arrangements. The cable also lists G-Sync and FreeSync compatibility.
These features matter when the connected devices support the corresponding functions; confirm the monitor and graphics hardware can use the feature you care about.
Construction and everyday handling
The described construction combines 28AWG tinned copper, triple shielding, gold-plated connectors, and a nylon exterior.
The plug has no latch, which can make disconnection straightforward; in a setup where the cable may be pulled or shifted, check that the connection feels secure and route it to avoid strain.
Alternatives to Silkland DP80 Cable
One useful longer-reach alternative is included; compare cable length and supported modes against your own setup before choosing.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 when its short reach suits the layout and you want the higher listed bandwidth tier.
Consider the 10-foot model when the display is farther away or you need more routing flexibility; its 54Gbps rating and listed modes may already suit your intended display setup.
- This 10-foot Silkland cable is listed at 54Gbps and supports modes including 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz.
- It is backward compatible with DisplayPort versions from 2.0 down to 1.0 and includes a braided exterior.
- The DP80 offers up to 80Gbps and is only 1.6 feet long, making it a close-range option for compatible high-bandwidth setups.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a compact gaming or desktop setup with DisplayPort 2.1 hardware, particularly when high refresh rates are a priority.
Its 80Gbps design, broad feature set, and short reach make a clear combination for nearby source and monitor placement.
Check the port-to-port route and confirm the source and display support your target mode before ordering.
If you need more than 1.6 feet, its limited reach is the deciding tradeoff; if the distance works and your equipment can use its capabilities, it is a well-targeted cable to shortlist.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers and desktop users with DP 2.1 equipment who want a short connection and support for high refresh rates.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and male-to-male connectors.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes include up to 16K at 60Hz and 4K at 540Hz.
- Includes VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3 support.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 channel formats.